Production introduction

MZ-2001 Electrician pipe impacting tester

Features and use: The tester suits for impacting experiments about all kinds of plastic pipes and ripple plastic pipes.It suits for GB/T14823.2、JG/T3050 and ZBG33008.

Main Parameters:
1、Max impacting energy: 6T
2、Max impacting height: 300mm
3、Weight of hammer: 1kg 2kg
4、Curvature radius: R300mm
5、Table type: flat type or 120°V type
6、Overall dimension: 300mm×140mm×670mm
7、Weight: 20kg

MZ-2005 Electrician pipe bending tester

Features and use: The tester suits for bending experiments of insulated electrician pipe.The total bending angle is 180°,we examine the samples have rip or not after experiment.It suits for GB/T14823.2、JG/T and ZBG33008.The tester can test three samples every time without exchange shaped model and bending moulded cylinder.

Main Parameters:
1、Sample pipe diameter: 16mm 20mm 25mm
2、Shaped model groove bottom diameter: 48mm 60mm 75mm
3、Bending moulded cylinder center track radius: 84mm
10mm 131.25mm
4、Radius of shaped cylinder groove: 8.1mm 10.1mm 12.6mm 5、Diameter of bending moulded groove bottom: 24mm 30mm
37.5mm
6、Total angle of sample bending: 180°
7、Overall dimension: 350mm×320mm×850mm
8、Weight: 30kg

MZ-2012 Globe pressure resisting heat tester

Features and use: It suits for resisting experiments of rigid bushing and fittings.Vernier caliper determines impress mark diameter under 60℃±2℃ and 20N.It suits for GB/T 14823.2 and JG 3050.

Main Parameters:
1、Sphericity press-head press: 20N
2、Sphericity diameter: 5mm
3、Test temperature: 60℃±2℃
4、Overall dimension: 380mm×250mm×120mm
5、Weight: 8kg

MZ-2015 Electrician pipe pressure tester
Features and use: Putting a cube on a sample. After lever and weight bring to bear a slow increscent force,dial indicator can test diameter of staving place and test mechanics performance of sample.It suits for GB/T14823.2、JG/T and ZBG33008.
	Main Parameters: 1、Max pressure: 1250N 2、Pressure precision: ±1% 3、Press-head standard: 50×50mm 4、Measuring range of pipe diameter changing: 0-3mm 5、Measuring accuracy: 0.01mm 6、Up and down flat size: 252×240mm 7、Up and down range: 90mm 8、Overall dimension: 726×340×545mm 9、Weight: 70kg

Back To Home Page


© Copyright Of JiangDu MingZhu Testing Machine Factory
Tel：86-0514-6235599 6235598		Linkman：Wang Lingyu Cai Yumei
Fax：86-0514-6235396		Email：jdmz@yzvod.com